Gelande 18th
Results 1 to 3 of 3

Thread: Yota 11 Steering issue

  1. #1
    Join Date
    Sep 2014
    Location
    Stockholm
    Posts
    2

    Default Yota 11 Steering issue

    Hello
    I believe there are no known issues about steering with the Yota 11 however I have already gone through 2 Axle casings! The screws that tighten the steering knuckles from the top have loosened and cannot be retightened as the hole becomes warn or gets too big. I guess lock tight might be a solution but thought I would see if anyone else has had any problems.
    Is on the Gelšnde 2 Defender
    Thanks!

  2. #2
    Join Date
    Apr 2012
    Location
    Southern Germany - Karlsruhe
    Posts
    311

    Default

    Epas set correct? If not, a strong servo will destroy your 3 axle ....
    Locktight is recommended and only soft tightening when assembling.
    [SIGPIC][/SIGPIC]
    In the end though, it all comes down to stick time...

  3. #3
    Join Date
    Sep 2014
    Location
    Stockholm
    Posts
    2

    Thumbs up

    Thanks for the reply! Epas was the problem - new part ordered should be sorted!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •