newb to rc, newb here, help mounting landies to Sawback please

[wrekd]

Hey all, I'm new to crawlers, I do have a sand scorcher I've had for a couple of years. I just got a Sawback and was wanting to mount some 1.55 Landies on it but I need hex adapters. I ordered some rc4wd Z-SO239 12mm hexes thinking those are what I need but I don't see how they are supposed to mount. Am I over thinking this or did I order the wrong adapters. I've googled and looked here but can't seem to find anything on mounting landies to a Sawback. I'm usually mechanically inclined but this one has me scratching my head. Thanks in advance.

[SteveC6R]

The Landies are pin drive style hubs so you don't need a hex, just put the cross pin thru the axle stub and mount the wheel. If you want to use hex hubs you still need a hex hub for the wheels that is found here: http://store.rc4wd.com/19-5-Lug-Stee...ub_p_2629.html

[wrekd]

The Landies are pin drive style hubs so wheels don't need a hex, just put the cross pin thru the axle stub and mount the wheel. If you want to use hex hubs you still need a hex hub for the wheels that is found here: http://store.rc4wd.com/19-5-Lug-Stee...ub_p_2629.html

Thanks for the reply and sorry for the delay in replying. The wheels seem to have some play or wobble from side to side when just using the pin drives so I guess I'll order the hex adapters in the link you kindly provided.