Full Tubed Exocage for Hilux and Mojave Body

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Update@RC4WD
    Moderator
    • Feb 2014
    • 6293
    #1

    Full Tubed Exocage for Hilux and Mojave Body

    Full Tubed Exocage for Hilux and Mojave Body




    Specifications:
    • Made to fit Tamiya Style Hilux Body and RC4WD Mojave
    • Tig Welded Tube Chassis
    • Precision hand made with complex fixtures
    • No holes needed to drill for fit to cab
    • Total Length: 17.9in / 456mm
    • Width: 7.4in / 190 mm
    • Highly: 5.51in / 140mm
    • Weight: 25.5oz / 724g











    Shown with Complete Mojave Body Set for Trail Finder 2 (Yellow) and Trail Finder 2 Truck Kit w/Mojave II Body Set (Z-K0049) for example (Not Included)









    Includes a custom cloth to help with installation



    Shown installed with Trail Finder 2 Truck Kit w/Mojave II Body Set (Z-K0049) for example (Not Included)





    What's Included:
    • 1x Full Tubed Exocage for Hilux and Mojave Body
    • 6x M3 x 16mm BHCS (Black) (Z-S0656)
    • 1x Installation Cloth

    Replacement Parts:
    • Complete Mojave Body Set for Trail Finder 2 (White)
    • Complete Mojave Body Set For Trail Finder 2 (Primer Gray)
    • Complete Mojave Body Set For Trail Finder 2 (Matte Black)
    • Finished Mojave Body Set for Trail Finder 2 RTR (Red) (Z-B0048)

    Notes:
    • Installation cloth is to help with installation of the cage over the body and help to prevent damage to the body or paint work. This can take some time and patience.
    • Fits RC4WD Trail Finder 2 RTR w/Mojave Body Set (Z-RTR0019 "Disc")
    • Fits RC4WD Trail Finder 2 RTR w/Mojave II Body Set (Z-RTR0024)
    • Fits RC4WD Trail Finder 2 Truck Kit w/Mojave Body Set (Z-K0042 "Disc")
    • Fits Trail Finder 2 Truck Kit w/Mojave II Body Set (Z-K0049)
    Tags: None
  • Update@RC4WD
    Moderator
    • Feb 2014
    • 6293
    #2
    Z-C0045 Discontinued on 4/22/2016.

    Comment

    • Update@RC4WD
      Moderator
      • Feb 2014
      • 6293
      #3
      RC4WD 1/10 Timberwolf Off-Road Scale Vehicle Kit (Bolted Edition)

      RC4WD 1/10 Timberwolf Off-Road Scale Vehicle Kit (Bolted Edition)

      Timberwolf is the world first tube chassis base on solid alum rods, no welding and brazing. The whole chassis is screwed together, with a lots of details and scale realism.
      Each chassis is hand made, every single rod is custom bend, drill the bottoms out, tap each hole, then file the bottom clean before assembled together. By far the most complex, detailed and labor time consuming chassis ever build.
      Timberwolf is a very untypical compare to all other production or off-road committed rc vehicles. It is ready for a variety of terrain such as sand, rock, mud and snow.


      Specifications:

      • Hand crafted chassis
      • T-Rex 60 scale plastic axle (front and rear straight)
      • Full adjustable billet lower Spy Chassis
      • R2 transmission
      • Delrin skid plate
      • Sheet alum front and rear cargo mounting plate
      • Alum 2.2" wheel and scale tires
      • High performance 110mm dual spring shocks
      • Heavyduty punisher Shaft
      • Full metal steering kit
      • Full ball bearings
      • Nylon strap lock for battery (2)
      • Weight: 6lbs/2.7kg
      • Length: XXmm/XXinch, Width: XXmm/XXinch, Height: XXmm/XXinch, Wheelbase: XXmm/XXinch, Axle ground clearance: XXmm/XXinch, Middle ground clearance: XXmm/XXinch
      • Chassis demensions are 466mm/18.3inch (Length) x 180mm/7.0inch (Height), 176mm/6.9inch (Width)
      • Manufactured by RC4WD















      What's Included:
      • 1x RC4WD 1/10 Timberwolf Chrome Kit

      Required to Complete:
      Electronics


      Important Notes:
      • This truck will require 1-2 hours of build time.
      • Lexan body panels require painting.
      • This is a pre-built crawler, changing tire or wheel type is not possible.
      • This kit will fit a strandard size 6 cell NIMH battery.

      Instruction Manual:
      • Not available yet....

      International customers (Non US)
      • If you plan to order this kit, make sure you choose EMS as shipping method.


      Print out panels template:
      Rear & inner Quarter Panels
      Side Door panel
      Optional Parts:
      • RC4WD ARB Diff Cover For The T-Rex 60 Axle (Z-S0220)
      • T-Rex 60 Chrome Diff Cover (Z-S0406)
      • Aluminum Steering knuckles (Z-S0569)
      • XVD Axle (Z-S0092)
      • Clear Hood for Timberwolf chassis is Part number (Z-B0014)
      • Ballistic Fabrication Dual Spring w/Faux Piggyback 100mm
      • Ballistic Fabrication Dual Spring w/Faux Piggyback 100mm (Black)
      • RC4WD King Off-Road Dual Spring Shocks (110mm Medium OD) (Z-D0065)
      • RC4WD King Off-Road Dual Spring Shocks (120mm Medium OD) (Z-D0067)

      Front

      • Billet Front Axle Case
      • The Ultimate Scale Shocks 90mm (Silver) Z-D0001
      • The Ultimate Scale Shocks 100mm (Silver) Z-D0003
      • The Ultimate Scale Shocks 90mm (Black) Z-D0009
      • The Ultimate Scale Shocks 100mm (Black) Z-D0010
      • RC4WD King Off-Road Scale Piggyback Shocks w/Faux Reservoir (110mm) Z-D0030
      • RC4WD King Off-Road Scale Piggyback Shocks w/Faux Reservoir (100mm) Z-D0031
      • Front Punisher Shaft (Z-S0523)
      • RC4WD Superlift Superide 100mm Scale Shock Absorbers (Z-D0032)


      Rear
      • Billet Rear Axle Case
      • The Ultimate Scale Shocks 90mm (Silver) Z-D0001
      • The Ultimate Scale Shocks 100mm (Silver) Z-D0003
      • The Ultimate Scale Shocks 90mm (Black) Z-D0009
      • The Ultimate Scale Shocks 100mm (Black) Z-D0010
      • RC4WD King Off-Road Scale Piggyback Shocks w/Faux Reservoir (110mm) Z-D0030
      • King Off-Road Scale Piggyback Shocks w/Faux Reservoir (100mm) Z-D0031
      • Punisher Shaft for AX10 Scorpion 105-140mm 4.37"-5.70" 5mm Hole
      • RC4WD Superlift Superide 100mm Scale Shock Absorbers (Z-D0032)

      Notes:

      • While some components may come assembled, it may be in your best interests to check the products to ensure all hardware is tight. In some cases you may want to apply threadlock to some of the hardware that is already installed.
      • Use good quality hex drivers to avoid stripping screw heads.
      • Use thread lock when putting metal screws into metal parts.
      • Steps marked with an asterisk (*) require thread lock.
      • Use thread lock sparingly.
      • Do not over tighten screws otherwise you may strip the thread.

      Comment

      • Update@RC4WD
        Moderator
        • Feb 2014
        • 6293
        #4
        RC4WD 1/10 Timberwolf Off-Road Scale Vehicle Kit (Bolted Edition)

        RC4WD 1/10 Timberwolf Off-Road Scale Vehicle Kit (Bolted Edition)

        Timberwolf is the world first tube chassis base on solid alum rods, no welding and brazing. The whole chassis is screwed together, with a lots of details and scale realism.
        Each chassis is hand made, every single rod is custom bend, drill the bottoms out, tap each hole, then file the bottom clean before assembled together. By far the most complex, detailed and labor time consuming chassis ever build.
        Timberwolf is a very untypical compare to all other production or off-road committed rc vehicles. It is ready for a variety of terrain such as sand, rock, mud and snow.


        Specifications:

        • Hand crafted chassis
        • T-Rex 60 scale plastic axle (front and rear straight)
        • Full adjustable billet lower Spy Chassis
        • R2 transmission
        • Delrin skid plate
        • Sheet alum front and rear cargo mounting plate
        • Alum 2.2" wheel and scale tires
        • High performance 110mm dual spring shocks
        • Heavyduty punisher Shaft
        • Full metal steering kit
        • Full ball bearings
        • Nylon strap lock for battery (2)
        • Weight: 6lbs/2.7kg
        • Length: XXmm/XXinch, Width: XXmm/XXinch, Height: XXmm/XXinch, Wheelbase: XXmm/XXinch, Axle ground clearance: XXmm/XXinch, Middle ground clearance: XXmm/XXinch
        • Chassis demensions are 466mm/18.3inch (Length) x 180mm/7.0inch (Height), 176mm/6.9inch (Width)
        • Manufactured by RC4WD















        What's Included:
        • 1x RC4WD 1/10 Timberwolf Chrome Kit

        Required to Complete:
        Electronics


        Important Notes:
        • This truck will require 1-2 hours of build time.
        • Lexan body panels require painting.
        • This is a pre-built crawler, changing tire or wheel type is not possible.
        • This kit will fit a strandard size 6 cell NIMH battery.

        Instruction Manual:
        • Not available yet....

        International customers (Non US)
        • If you plan to order this kit, make sure you choose EMS as shipping method.


        Print out panels template:
        Rear & inner Quarter Panels
        Side Door panel
        Optional Parts:
        • RC4WD ARB Diff Cover For The T-Rex 60 Axle (Z-S0220)
        • T-Rex 60 Chrome Diff Cover (Z-S0406)
        • Aluminum Steering knuckles (Z-S0569)
        • XVD Axle (Z-S0092)
        • Clear Hood for Timberwolf chassis is Part number (Z-B0014)
        • Ballistic Fabrication Dual Spring w/Faux Piggyback 100mm
        • Ballistic Fabrication Dual Spring w/Faux Piggyback 100mm (Black)
        • RC4WD King Off-Road Dual Spring Shocks (110mm Medium OD) (Z-D0065)
        • RC4WD King Off-Road Dual Spring Shocks (120mm Medium OD) (Z-D0067)

        Front

        • Billet Front Axle Case
        • The Ultimate Scale Shocks 90mm (Silver) Z-D0001
        • The Ultimate Scale Shocks 100mm (Silver) Z-D0003
        • The Ultimate Scale Shocks 90mm (Black) Z-D0009
        • The Ultimate Scale Shocks 100mm (Black) Z-D0010
        • RC4WD King Off-Road Scale Piggyback Shocks w/Faux Reservoir (110mm) Z-D0030
        • RC4WD King Off-Road Scale Piggyback Shocks w/Faux Reservoir (100mm) Z-D0031
        • Front Punisher Shaft (Z-S0523)
        • RC4WD Superlift Superide 100mm Scale Shock Absorbers (Z-D0032)


        Rear
        • Billet Rear Axle Case
        • The Ultimate Scale Shocks 90mm (Silver) Z-D0001
        • The Ultimate Scale Shocks 100mm (Silver) Z-D0003
        • The Ultimate Scale Shocks 90mm (Black) Z-D0009
        • The Ultimate Scale Shocks 100mm (Black) Z-D0010
        • RC4WD King Off-Road Scale Piggyback Shocks w/Faux Reservoir (110mm) Z-D0030
        • King Off-Road Scale Piggyback Shocks w/Faux Reservoir (100mm) Z-D0031
        • Punisher Shaft for AX10 Scorpion 105-140mm 4.37"-5.70" 5mm Hole
        • RC4WD Superlift Superide 100mm Scale Shock Absorbers (Z-D0032)

        Notes:

        • While some components may come assembled, it may be in your best interests to check the products to ensure all hardware is tight. In some cases you may want to apply threadlock to some of the hardware that is already installed.
        • Use good quality hex drivers to avoid stripping screw heads.
        • Use thread lock when putting metal screws into metal parts.
        • Steps marked with an asterisk (*) require thread lock.
        • Use thread lock sparingly.
        • Do not over tighten screws otherwise you may strip the thread.

        Comment

        • Update@RC4WD
          Moderator
          • Feb 2014
          • 6293
          #5
          RC4WD Timberwolf Scale Crawler Kit (Bolted Chrome)

          ID:Z-K0016，discontinued，5 /4/2017

          Comment

          Previous template Next
          Working...
          X