Results 1 to 12 of 12

Thread: Toy Bronco

  1. #1
    Join Date
    Oct 2009
    Posts
    396

    Default Toy Bronco

    This is what TFL offers as a fit it comes with high quality parts buy is a roller.
    I went a different route that TFL offers also. It's the Stainless chassis and fiberglass body. the body comes with the CNC headlights and stick shift and steering wheel. The interior doesn't have the seats witch is the axial Wraith seats or something that size will work.
    I really like the SSD transmission with the T-case mounted to it. I went with the SSD D60 wide axles on this build also. I'm using the Novak 17.5 brushless sensor motor with the Hobbywing 120 amp V3.1 esc
    22729128_1979103282116227_8949789412729300115_n.jpg
    Crawl me a river!

  2. #2
    Join Date
    Oct 2009
    Posts
    396

    Default

    So this is what I got in the mail.
    ae3c6db7-3f4d-4d82-83be-0c6469ee3ffa.JPG
    Crawl me a river!

  3. #3
    Join Date
    Oct 2009
    Posts
    396

    Default

    This is what I did with it.

    20171027_114926.jpg20171027_114959.jpg
    Crawl me a river!

  4. #4
    Join Date
    Oct 2009
    Posts
    396

    Default

    after the trans was installed I mounted the RC4WD King shocks
    20171027_171949.jpg
    Crawl me a river!

  5. #5
    Join Date
    Oct 2009
    Posts
    396

    Default

    After the shocks I looked at installing the links and the axles. Parts was coming in the mail so I was pulling parts and adding as they came in. so the links was part of that.
    20171029_175038.jpg22813983_1985495641476991_6370569198970405966_n.jpg22815592_1986764878016734_2277582222200557837_n.jpg 20171028_070856.jpg22852975_1988131174546771_8867833378877723106_n.jpg
    Crawl me a river!

  6. #6
    Join Date
    Oct 2009
    Posts
    396

    Default

    So you may have noticed the welded link mount to the front of the frame. It's not stainless and so I painted the welds silver so that it will not rust. as for the body I will have to say that I made some changes to it and some of those changes I'm not proud of. I will have the front grill fixed with a 3D printed grill soon and that will fix the damage I did with trying to mount the Winch on the top of the frame.

    20171028_070837.jpg22815304_1985495691476986_6169164342783292571_n.jpg22885779_1989372231089332_1191417837873585131_n.jpg22894001_1989369891089566_5153995534529212368_n.jpgIMG_8239.JPG
    Crawl me a river!

  7. #7
    Join Date
    Oct 2009
    Posts
    396

    Default

    So here id the front end that I need to repair and this is a picture of the new grill that is being mailed here from Switzerland.
    22730557_747697375435581_6288373518234426811_n.jpgIMG_8245.JPGIMG_8247.JPG
    Crawl me a river!

  8. #8
    Join Date
    Oct 2009
    Posts
    396

    Default It's alive!

    I was ale to take it to work with me and on the way back from one of my jobs I stopped at LOOP Loop pass and played in the snow for a few minutes.


    20171104_115726.jpg20171104_115739.jpgIMG_8237.JPG20171104_115751_Burst01.jpg
    Crawl me a river!

  9. #9
    Join Date
    Oct 2009
    Posts
    396

    Default

    The headlights will be running on 3s and should be very bright.

    22815234_1986764948016727_4725094869414513560_n.jpg
    Crawl me a river!

  10. #10
    Join Date
    Oct 2009
    Posts
    396

    Default

    Crawl me a river!

  11. #11
    Join Date
    Oct 2009
    Posts
    396

    Default

    Last edited by twissted; 01-27-2018 at 03:03 PM.

  12. #12
    Join Date
    Oct 2009
    Posts
    396

    Default

    The Pit Bulls are staying on this bronco20180206_122302.jpg
    Crawl me a river!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •