Announcement

Collapse
No announcement yet.

Chevotafun's Bullied SuDu Pro

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Chevotafun's Bullied SuDu Pro

    Hey Guys new to the Rc4wd Forum, glad to be here.

    Here is my Bullied SuDu build.

    The Reptile was a great chassis and served me well taking me to a first place overall finish last yr, but something just felt off about the Reptile.

    So next yr I will be running the Sudu Pro made by DravTech.
    hence the new build thread

    Tobias was awesome to deal with.
    Got the Orange skid plate with it and once he catches up I will be ordering his magic wands.

    Everything will be transferred over from the reptile

    Rc4wd Bully2 axles
    Chassis- Sudu Pro (new)
    SCX-10 shocks
    Mrc silver
    Mini-t silver springs
    35wt oil front shocks
    30wt oil rear
    Esc- BR Mini's
    Motors- 30t Flow Puller 500
    Going a new direction in motors JUST ORDERED THE NEW Brood NEXUS 16T cvr armature and lightweight can
    Servo- Hi-Tech 7980
    Rims- NCD
    CI Foams
    Fronts- well used med with comp cut
    Rears- New med with comp cut
    Skins- Krawler Koncepts (new)
    Links-D-lux (new)
    D-lux knuckle/Knuckle weights system (new)

    All alum hardware.

    Here is a picture of my new skins which imo look fricken awesome


    Attached Files
    Last edited by chevotafun; 01-21-2015, 08:06 AM.
    LMRCC Club President

    2013, 2014, 2015 LMRCC Pro/Sporty Champion

    Proudly Sponsored By-
    Team RC4WD
    GOGO Hobbies
    Team DravTech

  • #2
    Nice to see you post in here Mike.
    Last edited by cboggs; 01-16-2015, 12:17 PM.
    The 5th Dimension Owner/Driver
    Team Brood

    Comment


    • #3
      Getting my build thread over here up to date
      The mailman showed up yesterday with the chassis

      Dam that skid plate is lite and pretty thin hope it holds up
      DSC_0411.jpgDSC_0410.jpgDSC_0409.jpg
      Last edited by chevotafun; 01-21-2015, 07:25 AM.
      LMRCC Club President

      2013, 2014, 2015 LMRCC Pro/Sporty Champion

      Proudly Sponsored By-
      Team RC4WD
      GOGO Hobbies
      Team DravTech

      Comment


      • #4
        Yes sir the links showed up yesterday
        So after I getting the little one put to sleep I got to work ripping the reptile apart.
        Got it pretty much all back together, but something funky is going on with the front links.

        But I was to crossed eyed by that time to try to figure it out at midnight knowing I have to be up at 4:30 for work

        This is were it sits
        Attached Files
        Last edited by chevotafun; 01-21-2015, 07:25 AM.
        LMRCC Club President

        2013, 2014, 2015 LMRCC Pro/Sporty Champion

        Proudly Sponsored By-
        Team RC4WD
        GOGO Hobbies
        Team DravTech

        Comment


        • #5
          Here are some pictures of how it looks as of now.
          Still missing my skins

          pic-1 Fully compressed
          pic-2 Flex shot

          DSC_0431.jpgDSC_0430.jpgDSC_0429.jpgDSC_0433.jpgDSC_0432.jpg
          Last edited by chevotafun; 01-21-2015, 07:26 AM.
          LMRCC Club President

          2013, 2014, 2015 LMRCC Pro/Sporty Champion

          Proudly Sponsored By-
          Team RC4WD
          GOGO Hobbies
          Team DravTech

          Comment


          • #6
            More to come shortly to get this thread up to date
            Last edited by chevotafun; 01-21-2015, 07:26 AM.
            LMRCC Club President

            2013, 2014, 2015 LMRCC Pro/Sporty Champion

            Proudly Sponsored By-
            Team RC4WD
            GOGO Hobbies
            Team DravTech

            Comment


            • #7
              Truck weight came in at 4lbs flat lol
              I think when done I will be a hair under 4lbs

              Alittle update form last night wrench session.
              Moved the front upper links on the chassis side to the top hole to give the upper link a better angle.

              Had to put a long rod end on the front uppers to get the diff pitch up enough to get the electronics' tray to clear the lower link on the driver side when flexing.

              The length came in at 12.25"
              So a quick couple turns of the rod ends and she was sitting at 12.5"

              Got in acouple battery's last night on the test pile and all seems to be working.
              Might flip my springs from front to back the way I had my switch set up.

              First time driving a 40/60 chassis set up definitely a little different, that's for sure but still drove very nice.

              Couldn't get the D-lux knuckles on yet as there was something missing lol
              All good tho Eric is taking care of that

              I will take some photos tonight of how it sits and maybe a quick video of it in action.

              Just waiting on my skins and she is basically ready to go for this weekends comp.

              Can't wait to she what she can do
              LMRCC Club President

              2013, 2014, 2015 LMRCC Pro/Sporty Champion

              Proudly Sponsored By-
              Team RC4WD
              GOGO Hobbies
              Team DravTech

              Comment


              • #8
                First Comp went well pulled a first place with the new chassis
                Truck felt good, still needs a few tweaks but all and all super happy with the way it felt right out of the box.

                First time running a 60/40 chassis

                Love benign able to drive upside down again

                Might need to get some other rear lower links to try with a little less bend as these one hit the uppers, causing some binding and limiting the truck from getting its full flex.
                LMRCC Club President

                2013, 2014, 2015 LMRCC Pro/Sporty Champion

                Proudly Sponsored By-
                Team RC4WD
                GOGO Hobbies
                Team DravTech

                Comment


                • #9
                  Scores from the day

                  Randy-Mammoth
                  Bob-Solitiare
                  Ray-
                  Deron-BillyD
                  Brett- brettd
                  Mike- Chevotafun
                  DSC_0436.jpg
                  LMRCC Club President

                  2013, 2014, 2015 LMRCC Pro/Sporty Champion

                  Proudly Sponsored By-
                  Team RC4WD
                  GOGO Hobbies
                  Team DravTech

                  Comment


                  • #10
                    Got my link issue all worked out, just needed to twist the link alittle more
                    DSC_0437.JPG
                    LMRCC Club President

                    2013, 2014, 2015 LMRCC Pro/Sporty Champion

                    Proudly Sponsored By-
                    Team RC4WD
                    GOGO Hobbies
                    Team DravTech

                    Comment


                    • #11
                      A picture of my sweet skin from Krawler Koncepts
                      DSC_0445.jpg
                      LMRCC Club President

                      2013, 2014, 2015 LMRCC Pro/Sporty Champion

                      Proudly Sponsored By-
                      Team RC4WD
                      GOGO Hobbies
                      Team DravTech

                      Comment


                      • #12
                        Going to be making acouple changes the truck.

                        Ordered a set of the New Brood Nexus 16T CVR motors with light weight can. Same armiture that was used on the truck that won Worlds
                        For the price of these motors I just couldn't pass them up.

                        Bearings for my D-lux knuckles should be here today or tomorrow so I can get those installed.

                        Also ordered a set of orange G10 rims from D-lux to go with the rest of the orange theme.

                        Oh and we had another comp over the weekend and the Sudu pulled a first place.
                        Truck is feeling very balanced and predicable now

                        Randy-Mammoth
                        Bob-Solitiare
                        Ray-
                        Deron-BillyD
                        Brett- brettd
                        Mike- Chevotafun
                        DSC_0444.jpg
                        LMRCC Club President

                        2013, 2014, 2015 LMRCC Pro/Sporty Champion

                        Proudly Sponsored By-
                        Team RC4WD
                        GOGO Hobbies
                        Team DravTech

                        Comment


                        • #13
                          Woo Hoo Rims show up and they look great, can't wait to get them on.

                          Thanks Eric
                          DSC_0451.jpg
                          LMRCC Club President

                          2013, 2014, 2015 LMRCC Pro/Sporty Champion

                          Proudly Sponsored By-
                          Team RC4WD
                          GOGO Hobbies
                          Team DravTech

                          Comment


                          • #14
                            Finally got the new rims all mounted up.
                            Went with narrowed silvers this time.

                            Foams
                            front-narrowed 6" comp cuts with soft outter narrowed
                            Rear- narrowed 5.5" comp cuts with medium outter

                            So far they seem to be working only got about 6 batteries on them lol
                            Really digging the looks of these rims
                            DSC_0455.jpgDSC_0454.jpg
                            LMRCC Club President

                            2013, 2014, 2015 LMRCC Pro/Sporty Champion

                            Proudly Sponsored By-
                            Team RC4WD
                            GOGO Hobbies
                            Team DravTech

                            Comment


                            • #15
                              Just wanted to give HUGE shout out to my NEW sponsor TEAM RC4WD
                              I would like to say thanks to John for picking me to be part of such a great company, I look forward to working with him and the rest of the Team drivers.

                              Lets just say i'm pretty excited to be part of the Team.

                              This should bring this build thread up to date I think LOL
                              LMRCC Club President

                              2013, 2014, 2015 LMRCC Pro/Sporty Champion

                              Proudly Sponsored By-
                              Team RC4WD
                              GOGO Hobbies
                              Team DravTech

                              Comment

                              Working...
                              X