Yes another Bully2 build: Hulksta Riddler Pro

[noname]

So, i put my hands on another set of slightly used Bully2 axles from a friend of mine so decide to try something new/different... The Hulksta Riddler Pro chassis came naturally...


What i have so far:

-Hulksta Riddler Pro chassis (ordered)
-Links Ti Mr Links (ordered)
-RC4WD Bully 2 axles
-Beadlocks Dravtech Tri-Blade Cyclone cf
-Tires Ottsix Voodoo Silver
-Foam CI DD comp cut soft/med
-VP hubs
-RC4WD knuckles weight
-Traxxas revo rod ends
-Servo Savox 416oz
-Alu servo horn
-Gunnar hex pins
-Receiver Futaba 4pl decase
-Axial scx alu shocks (4)
-Axial scx stock plastic shocks (2)
-Losi mrc silver springs



And what's missing:

-combo HH mini br dual +bec or 2x micro Sidewinder smashed +bec
-2 x motors (would like HH crawlmaster pro 16t ou or again, puller 400) but to be a bit reasonnable, probably 2x Tekin handwound 35t
-Dravtech Bully 2 cf battery mount et cf servo mount
-Dlux Ti et Delrin rod ends slidder
-Skinz par KK

[noname]

Woot woot, chassis and links are on their way!!!

[noname]

Look what showed up this morning...

A beautifull piece of engineering...

A big thanks to Daniel @ Hulksta Engineering and Greg @ Mr Links...

[noname]

And the custom Ti links for the Bully2 axles...

[noname]

Oh yeah, and i bought a 2nd Futaba 4pls for this build, so now i will be able to ride and ''compete'' with my partner...

[noname]

Damn... forgot to ordered the Dlux rod ends sliders... So i did but went cheap this time... yeah, i only took the delrin one... no Ti... I know i know, sorry

[noname]

New alien spaceship look-a-like panels for an out-of-space chassis...

Thx Michelle @ Krawler Konceptz

[noname]

And finally found my axles accessories... thx to an rcc member...

[noname]

Ohhhhhh, freshly delivered...

[noname]

Dlux rod ends slidder showed up today... Will be able to mount links, shocks, bully acc to axles... Waiting on my KK skins...
And still no electro...

[noname]

Did s bit of work on the Riddler today...


Mount rod ends and slidders on Mr Links Ti links
Build shocks with MRC silver soft spring and Dlux no preload cup... No oil yet...
Decase my 4pl receiver
The big part of the job was to stip and clean the Bully2 axles (bought them used from a friend)... Installed the NCD acc...
Found the 1st piece of electro... Savox servo 416oz
Tires: Voodoo tires/CI foams/NCD wheels/VP hubs...

[noname]

What it gonna looks like...

[noname]

Finally managed to buy my electronics... HH mini br dual smashed w/bec, 2x crawlmaster expert...

[noname]

Took the time to work on the Riddler... Still a lot to do, to tune and still have to received my electronic from HH... But it looks like i have a roller


Only mock up for now, have to change hardware for proper one, tune the shocks (i want a lower stance...), tune the 5th and 6th shocks, clock the axles... For now only installed the 5th with an internal ''Bic pen'' spring... seems to work...


So now, what spring do u use for internal scx shocks?
I want a lower stance, a kind of droop setup... How can i tune my shocks? Oil? Springs? ect...



Normal stance... I want it lower than this... any tip for the shocks???


full extension with the help of the 5th-6th ''in cab'' shocks


Upside down


A lot of flex... a bit too much lol...


Not the lightest for a roller but its a start...

[noname]

The heart and soul of the beast is finnally here... HH br mini dual smashed w\bec and 2x crawlmaster expert...
Still need setup and configuration, etc...