Announcement

Collapse
No announcement yet.

ARB Hilux

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • #31
    Good, a few days stopped changing car 1/1, but I've done something good from the shadows ....

    I removed the Robitronic going luxury, but better is always a novak goat 3s 21.5T motor and external bec ...

    http://euskoscalecrawler.foroactivo.com/forum

    sigpic

    Comment


    • #32
      very cool man

      Comment


      • #33
        Originally posted by Basilis Tsokos View Post
        very cool man
        Thanks !!!

        Well I leave you with the following, after two shields and two cabpar crowns, I desist from mount yota axles ... or are crap or not explain, but I've had two couples and no ... volvere to business as usual. Axial and take some .. for **** ...
        As there, I decided to spring back and as I have internal spring dampers, crossbows do more less alone Clamping Shaft ...
        These days ago faileth adjust springs and I'll make a traction bar (antiwrap) to prevent the rear axle turn on itself ....






        And the absence of adjustments, so less is more




        And here is what the wheels come with the axial axis ...
        http://euskoscalecrawler.foroactivo.com/forum

        sigpic

        Comment


        • #34
          Hi, I've done the traction bar. From time to confirm proper operation remains so when will reinforce and confirm the best will do.



          http://youtu.be/Oy8fkct2AP0
          http://euskoscalecrawler.foroactivo.com/forum

          sigpic

          Comment


          • #35
            Happy!

            On Saturday we did the test to Axial axles ...

            They endured? IF more less!

            I broke a stub axle, but had short link because the direction of advance and on a very narrow channel and made lever and turn ... We broke with the idea of ​​Peter other hole that was left knuckle arm and we lengthened the long link straight so we stay still, turned around the horn to delay the short link and stand entire route without any problems ....

            Now:
            Alu Wheel GPM (Tracker 14.90, not cheap)


            I have also removed the spring and I'm back to put the links back. Cansao of inventions went well ... but much bent ...


            It is very short, but some adjustments this week and ready for Saturday!
            http://euskoscalecrawler.foroactivo.com/forum

            sigpic

            Comment


            • #36
              Good, because in the end I came back to the origins, I have removed the goat3s Novak, fine going brushless but only has 15% drag brake and is a pain and I do not want to put brushes. At the end I changed to Udo for Robitronic, as I like slow and have plenty of chicha, is a 17.5T, I have some topping station and will film, a photo looks like:
              On the right side going lipo that weighs more than the drive and the receiver, but as in the body on the left will take you to the driver and the mobile battery for led, more or less going well compensated.


              And here is a side shot so you can see where will electronics and what is the maximum height weight ... is well short
              http://euskoscalecrawler.foroactivo.com/forum

              sigpic

              Comment


              • #37
                good saturday morning...









                http://euskoscalecrawler.foroactivo.com/forum

                sigpic

                Comment


                • #38







                  One of the last photos ....
                  Here persecuted and pressured by Adrimar ... Normal as that goes hilux silver!



                  Here alongside fellow edu (highcold) with its pitufin pickup ... impressive as the D90 ... climbing boot boot and boot up!


                  Little is left for my hilux for a radical change ... and I can not give more clues ....
                  http://euskoscalecrawler.foroactivo.com/forum

                  sigpic

                  Comment


                  • #39
                    surprise !! rcmodelex hilux truggy maxi-pro !!





                    http://euskoscalecrawler.foroactivo.com/forum

                    sigpic

                    Comment


                    • #40
                      https://www.youtube.com/watch?v=d3su9NtzEc8


                      http://euskoscalecrawler.foroactivo.com/forum

                      sigpic

                      Comment


                      • #41
                        NEW LOOK FOR TRUGGY







                        http://euskoscalecrawler.foroactivo.com/forum

                        sigpic

                        Comment


                        • #42














                          little accident , work for setember after holidays....
                          http://euskoscalecrawler.foroactivo.com/forum

                          sigpic

                          Comment


                          • #43
                            last photos with new rims...





                            http://euskoscalecrawler.foroactivo.com/forum

                            sigpic

                            Comment


                            • #44
                              NEW LOOK











                              http://euskoscalecrawler.foroactivo.com/forum

                              sigpic

                              Comment


                              • #45
                                Hi,more hours of work, a lot of them....hehehehe

                                new integy piggyback shocks 91mm , new rear suspension mount , rear no have space for piggy back bottle , so external mount for better for lateral angles . Two new rear lights and new wheelbase , 304mm .








                                http://euskoscalecrawler.foroactivo.com/forum

                                sigpic

                                Comment

                                Working...
                                X