Announcement

Collapse
No announcement yet.

Open top Defender 90 body build

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • twissted
    started a topic Open top Defender 90 body build

    Open top Defender 90 body build

    So I have cut the top off and it's resting in place. I will cover how it stays in place and the trim that it take to get the scal finish so that it looks like the real D-90.

    The razor saw is a must to get the clean strait cuts with no loss of marerial of the body.


    The Channel is what is needed to give it the look like it was ment to be this way. I have more to do of course but it's a start. The cutting the roof off and adding these parts took only a 1/2 hour to do, this is the easy part.

  • twissted
    replied
    I tried the Jeep steering wheel just because of it's smaller size.

    Leave a comment:


  • twissted
    replied
    I haven't built the chassis yet but I'm thinking it will look a lot like the one I built for the JK I'm also working on.

    Leave a comment:


  • twissted
    replied
    Awesome! I got the cab started!


    Leave a comment:


  • twissted
    replied
    Most you will not like this but I want to do this build with Worminator axles.
    That and the T1 Disruptor Black Transfer Case (.75:1 gearing) with asimple motor mount is all the drivetrain I want to use. Simple light and different.
    Last edited by twissted; 09-08-2014, 02:07 PM.

    Leave a comment:


  • twissted
    replied


    Leave a comment:


  • twissted
    replied
    It's tiny next to my Gladiator!

    Leave a comment:


  • twissted
    replied

    The rear pan is started. It is much deeper than the stock set up. I need to order the pickup cab conversion or just leave it open. I will and the back of the cab in place so that the wheel tubs can be made and installed.
    I added some pieces that will help keep the pan strait on the out side edges and also to make it stiffer and stronger.

    Leave a comment:


  • twissted
    replied
    It's hard to see, but the front fenders have diamond plate on them.

    Leave a comment:


  • twissted
    replied
    I cut out the read pan. I will be making one that is more scale to the Defender 90. I will leave the rear seat out I think also.

    Leave a comment:


  • twissted
    replied
    So how do you like the new dash board?



    The center is cut from a 1/10 scale Jeep dash and then shaped the piece to fit this dash. No more sticker for a radio!

    Leave a comment:


  • twissted
    replied
    The Scaler Store - TSS Defender 90 Pickup Conversion kit
    This is not my build it is a picture of the conversion kit being used. From there web page

    Leave a comment:


  • twissted
    replied
    I should point out that the reason I cut the top off is because of the weight that it has. I also cut everything that I build and so this is just another one.
    I'm hoping that when I build the frame and running gear that it is a scale be well handling/climbing machine.
    I my make it a 1/2 cab just to keep it different also.


    Leave a comment:

Working...
X