Smarter than a FO-XX

[twissted]

Specs as follows:
Losi 1/8 TLR truggy rear shocks all 4 corners
Max 8 Brushless system 4074 2200 kv motor runs on 4s to 6s
Axles at 15 inch wheelbase
Custom 3.5'' wheel mounted to Proline Badlands 5.75'' tall
Brushless and waterproof HV steering servo
Custom CVD front axles, Custom CVD drive shafts and custom 1 piece axle shafts in the rear.
Custom axles with aluminum beef tubes installed.

(((((THIS ISN'T BUILD THREAD BECAUSE IT ONLY TOOK 2.5 DAY'S TO BUILD)))))
It to be used a guide for those that Are looking to build the ultimate in RTR based rc.
I can't think of a single rc of this size that can handle the power this thing can take.
The axles being built is key!

[twissted]

Interior also was done using Yeti 380 interior, with a spare tire in the back.
Glue was used to hold in place (E6000)

[twissted]

I should show what I started with as a point of reference.
so lets take a look at what was changed:
1st was the lipos tay in the front over the axle.
2nd was the axles being built and installed with new 4 link suspension
New Longer shocks was installed using the stock springs.
3rd New steering was made and servo was upgraded and moved.
4th was the Proline tires was mounted
5th the interior was installed with LED lights in front grill
I used OFNA diff lock goop in both diffs I also added spider gears to add strength and resistance in side.

[twissted]

Future plans will the JConcepts Ruptures cut to fit a 1/8 Buggy wheel. So that a 17mm hex will fit the 17mm hub.

[twissted]

Happy trails!