Announcement

Collapse
No announcement yet.

rc4wd TF2 electronic problem

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • rc4wd TF2 electronic problem

    Hello everyone,

    just receive my new Trail Finder 2 RTR (Part Number:Z-RTR0034) but I have some problems with the electronic:
    1- The steering servo was working in reverse order but I just reversed the channel on the transmitter.


    2- The main problem is that the truck speed in reverse is faster than on forward.
    The trigger of the transmitter is in the correct direction (if I push it, the truck goes forward)
    On the radio I found the TH channel reversed (see attachment) and I supposed that if I just change it to NORMAL, the ESC will work on reverse.
    What I did is to put the CH throttle on the transmitter to NORMAL and I inverted the polarity of the motor (red with black)
    Is it correct?



    Thanks a lot
    Michele

    IMG_7808.jpg
    Last edited by Miko; 01-24-2018, 09:08 AM.

  • #2
    Yep, that's what I would suggest. The set-up of the TF2 and G2 are such that the motor turns in reverse to many other kits. My G2 Cruiser RTR came with the motor wires switched and the controller set to normal.

    Enjoy.
    <>< | agent ORANGE | TenderFoot | FRANKENGREEN | RAFFLE-1
    Tennessee Scale Crawlers
    sigpic

    Comment


    • #3
      Originally posted by btoungette View Post
      Yep, that's what I would suggest. The set-up of the TF2 and G2 are such that the motor turns in reverse to many other kits. My G2 Cruiser RTR came with the motor wires switched and the controller set to normal.

      Enjoy.

      Ok thanks

      Comment

      Working...
      X